User's Manual






PIP Mode
When PIP/PBP activated
PIP Source
Size
Position
Contrast
Hue
Saturation
Back
or
PIP/PBP submenu when PIP/PBP ON(mainsourceisVGA/DVI-Dinput)
PIP/PBP submenu when PIP/PBP ON


or
NOTE: When using DVI source, the Auto adjustment is not available.
There are two modes: Picture in Picture (PIP) and Picture by Picture (PBP)
Use and tobrowseand to select "Off", "PIP" or "PBP".
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/Composite/Component)
Use and tobrowseand to select.
Select PIP window size.
Use and tobrowseand to select.
Select PIP window position.
Use and tobrowseand to select.
Adjust the contrast level of the picture in PIP/PBP Mode.
reduces the contrast
increases the contrast
This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
shifts image color towards purple
Adjust the color saturation of PIP/PBP image.
makes the image look more monochrome
makes the image look more colorful
Touch  to go back to the main menu.