User's Manual

104 RACADM Subcommand Details

• racadm getversion -l -m server-1 -f bios

ifconfig

NOTE: To use this subcommand, you must have Execute Diagnostic Commands or

Configure iDRAC permission.

Synopsis

racadm ifconfig

Example

$ racadm ifconfig

eth0 Link encap:Ethernet HWaddr 00:1D:09:FF:DA:23

inet addr:10.35.155.136 Bcast:10.35.155.255

Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST MTU:1500

Metric:1

RX packets:2550665 errors:0 dropped:0

overruns:0 frame:0

TX packets:0 errors:0 dropped:0 overruns:0

carrier:0

BIOS 1.2.1 Reinstall

iDRAC 3.20 Reinstall

PERC6 Emb (raid-2) 07.01.33.00 Rollback

PERC6 Emb (raid-2) 07.01.33.00 Reinstall

server-1 BIOS 1.2.1 2010-11-22

Subcommand Description

ifconfig Displays the contents of the network interface table.