Deployment Guide
Steps
1. To change the default Administrator password, type a password for the Administrator account in the Password eld.
2. In the Conrm Password eld, retype the password.
3. To set a Support User password, type a password in the Password eld.
4. In the Conrm Password eld, retype the password.
5. Select or deselect the Support Access Enabled checkbox.
6. Click Finish.
The FluidFS cluster is added to Dell Storage Manager and displayed on the Storage view.
Set Support User Password
Use the this page to set the support user password.
Click Setup FluidFS NAS to reenter the Add FluidFS Cluster wizard. The Set Support User Password page opens. The
support account is used by Dell Technical Support to perform remote troubleshooting. A password must be set for the support
account even if it is disabled.
Figure 36. Add FluidFS Cluster Wizard — Set Support User Password Page
a. In the Password eld, type a password for the support account.
b. In the Conrm Password eld, retype the password.
c. (Optional) Select the Support Access checkbox to enable the support account.
Remove a FluidFS Cluster From Dell Storage Manager
Remove a FluidFS cluster if you no longer want to manage it using Dell Storage Manager. For example, you might want to move the
FluidFS cluster to another Dell Storage Manager Data Collector.
1. Click the Storage view and select a FluidFS cluster.
2. Click the File System tab.
3. In the right pane, click Delete to open the dialog box.
4. Click OK.
44
Congure the FluidFS Cluster