Deployment Guide
Figure 26. Add FluidFS Cluster Wizard — Connectivity Report (Up)
2. If the iSCSI conguration is correct, proceed to step 3. Otherwise, perform the following steps to modify the iSCSI
conguration. After you are past the
Connectivity Report page, you will no longer be able to modify the iSCSI conguration
using the
Add FluidFS Cluster wizard.
a. Close the Add FluidFS Cluster wizard by clicking the Close (x) button in the top-right corner of the wizard. The Summary
tab is displayed.
Figure 27. Cluster Setup Not Complete
b. Click Next. The Existing iSCSI Conguration page opens.
38
Congure the FluidFS Cluster