Deployment Guide
Figure 19. Add FluidFS Cluster Wizard — Congure Time Settings Page
Steps
1. From the Time Zone drop-down menu, select the time zone where the FluidFS cluster is located.
2. (Optional) Congure the cluster to synchronize time with one or more NTP servers.
a. Add an NTP server by typing a host name or IP address in the eld and clicking Add.
b. Select the Set Time Using NTP Enabled checkbox.
c. If the time displayed in the Current Time eld is correct, click OK.
d. To change the current time, clear the Set Time Using NTP Enabled checkbox.
e. From the Current Time drop-down list, select the date and time.
3. Click Next.
The Select Storage Centers page opens.
Select Storage Centers
Select Storage Centers to provide storage for the FluidFS cluster NAS pool. Starting with FluidFS v5, you can select an unlimited
number of Storage Centers.
About this task
Use this page of the Add FluidFS Cluster wizard to select the Storage Centers to use for storage in the FluidFS cluster.
Figure 20. Add FluidFS Cluster Wizard — Select Storage Centers Page
Steps
1. Select the Storage Centers.
2. Click Next.
Congure the FluidFS Cluster
33