Deployment Guide

Figure 14. Add FluidFS Cluster Wizard — Select Appliances Page
Steps
1. Add or remove appliances from the cluster.
• To add an appliance, select an appliance in the upper pane, then click Add Appliance.
• To remove an appliance, select an appliance in the lower pane, then click Remove Appliance.
NOTE: All appliances in a single cluster must be the same model.
2. Click Next.
The Congure Client Network page opens.
Congure the Client Network
Add the remaining client VIPs and controller IP addresses.
About this task
Use this page of the Add FluidFS Cluster wizard to congure additional client VIPs and congure the controller IP addresses.
Figure 15. Add FluidFS Cluster Wizard — Congure Client Network Page
30
Congure the FluidFS Cluster