Deployment Guide
Log In to Dell Storage Manager
Use the Dell Storage Manager Client to log in to the Dell Storage Manager Data Collector.
Prerequisites
The Dell Storage Manager user account must have the Administrator privilege to view, manage, or add FluidFS clusters in the Dell
Storage Manager Client.
Steps
1. Start the Dell Storage Manager Client application.
2. In the User Name eld, type the Dell Storage Manager Data Collector user name.
3. In the Password eld, type the Dell Storage Manager Data Collector password.
4. In the Host/IP eld, type the host name or IP address of the server that hosts the Data Collector. If the Data Collector and Dell
Storage Manager Client are installed on the same system, you can type
localhost instead.
5. If you changed the Web Server Port during installation, type the updated port in the Web Server Port eld.
6. Click Log In. The Dell Storage Manager Client connects to the Data Collector and displays the Storage view, including FluidFS
clusters.
Figure 13. Dell Storage Manager — Storage View
Add the FluidFS Cluster to Dell Storage Manager
Add the FluidFS cluster to Dell Storage Manager to complete initial conguration.
1. In the Dell Storage Manager Client, click the Storage view.
2. In the left pane, select FluidFS Clusters.
3. In the right pane, click Add FluidFS Cluster.
The Add FluidFS Cluster wizard starts and opens the Register FluidFS Cluster w/ Dell Storage Manager page.
Select Appliances
Use the Add Appliance button to include additional appliances in the cluster and the Remove Appliance button to exclude additional
appliances from the cluster.
About this task
Use this page of the Add FluidFS Cluster wizard to add appliances to or remove appliances from the FluidFS cluster.
Congure the FluidFS Cluster
29