Reference Guide

Table 2. Dell Command | Update CLI Options (continued)
CLI options Description Syntax Expected values
The password is cleared if a
password is not provided or ""
is supplied.
NOTE: The value must be
enclosed in double quotes.
-catalogLocation
Allows the user to set the
repository/catalog file
location. If used with /
applyUpdates, only one path
may be specified.
dcu-cli.exe /configure -
catalogLocation=C:\catalog.x
ml
One or more catalog file
paths.
-customProxy
Allows the user to enable or
disable the use of custom
proxy.
NOTE: Setting this option
to enable will cause
validation of all custom
proxy settings.
dcu-cli.exe /configure -
customProxy=enable
<enable|disable>
-
defaultSourceLocat
ion
Allows the user to enable or
disable the fallback to the
default source location.
NOTE:
Setting this option to
enable, the Dell Command
| Update application
installs the updates from
the Default Source
Location if the other
source locations selected
fails to update .
NOTE:
Setting this option to
disable the Dell Command
| Update application will
not install the updates
from the Default Source
Location.
NOTE: To disable this
option at least one source
location should be
provided.
dcu-cli.exe /configure -
defaultSourceLocation=disabl
e
<enable|disable>
-downloadLocation
Allows the user to specify the
location to override the
default application download
path.
dcu-cli.exe /configure -
downloadLocation=C:\Temp
\AppDownload
A folder path
-
driverLibraryLocat
ion
Allows the user to set the
system driver catalog location.
If this option is not specified,
the driver library shall be
downloaded from Dell.com.
dcu-cli.exe /configure -
driverLibraryLocation=C:\Tem
p\DriverLibrary.cab
A file path with .cab
extension
Dell Command | Update command-line interface 9