Users Guide

Table 4. Dell Command | Update CLI Commands (continued)
CLI options Description Syntax Supported Options
used with any
other options
except -
outputLog and -
silent
-scheduleAuto, -
scheduleManual, -
scheduleMonthly,
-scheduleWeekly
/scan
Performs a system scan to determine the
updates for the current system
configuration.
NOTE: Options passed here are for one
time use only, for that current run.
dcu-cli.exe /scan
-<option>=<value>
Ex: dcu-cli.exe /
scan
dcu-cli.exe /scan
dcu-cli.exe /scan
-
updateType=bios,f
irmware
-silent
-outputLog
-updateSeverity
-updateType
-
updateDeviceCat
egory
-
catalogLocation
-report
/applyUpdates
Applies all updates for the current system
configuration.
NOTE: Options passed here are for one
time use only, for that current run.
dcu-cli.exe /
applyUpdates -
<option>=<value>
Ex: dcu-cli.exe /
applyUpdates
dcu-cli.exe /
applyUpdates -
silent
dcu-cli.exe /
applyUpdates -
updateType=bios,f
irmware
-silent
-outputLog
-updateSeverity
-updateType
-
updateDeviceCat
egory
-
catalogLocation
-reboot
-
encryptedPasswo
rd
-
encryptedPasswo
rdFile
-encryptionKey
-
autoSuspendBitL
ocker
Mandatory options:
These options are
required to be
provided with the
specific commands
listed below:
-
encryptedPasswo
20
Dell Command | Update command line interface