Reference Guide

Table 1. Dell Command | Update CLI commands (continued)
CLI options Description Syntax Supported Options
-importSettings,
-
exportSettings,
-lockSettings.
NOTE: This option
cannot be used
with any other
options except
-outputLog and
-silent
-scheduleAuto,
-scheduleManual,
-scheduleMonthly
, -scheduleWeekly
/scan
Performs a system scan to determine
the updates for the current system
configuration.
NOTE: Options passed for this
command run only once. If no options
are specified with this command,
the Command Line Interface uses
the existing application settings to
process this command.
dcu-cli.exe /scan
-<option>=<value>
Ex: dcu-cli.exe /
scan
dcu-cli.exe /scan
dcu-cli.exe /scan
-updateType=bios,fi
rmware
dcu-cli.exe /scan -
updateSeverity=secu
rity, recommended
-silent
-outputLog
-updateSeverity
-updateType
-updateDeviceCat
egory
-catalogLocation
-report
/applyUpdates
Applies all updates for the current system
configuration.
NOTE: Options passed for this
command run only once. If no options
are specified with this command,
the Command Line Interface uses
the existing application settings to
process this command.
dcu-cli.exe /
applyUpdates
-<option>=<value>
Ex: dcu-cli.exe /
applyUpdates
dcu-cli.exe /
applyUpdates
-silent
dcu-cli.exe /
applyUpdates
-updateType=bios,fi
rmware
-silent
-outputLog
-updateSeverity
-updateType
-updateDeviceCat
egory
-catalogLocation
-reboot
-encryptedPasswo
rd
-encryptedPasswo
rdFile
-encryptionKey
-autoSuspendBitL
ocker
Mandatory options:
These options are
required to be
provided with the
specific commands
listed below:
Dell Command | Update command-line interface
7