Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.3 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.3
- Attributes supported in Dell Command | PowerShell Provider 2.3
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.3
- Accessing documents from the Dell EMC support site
Table 30. Wireless (continued)
Attribute Name Description
WirelessSwitchWiGigCtrl
Determines that Wireless Gigabit Alliance (WiGig) radio can be controlled by the physical
wireless On/Off switch.
Possible values:
● Enabled—Physical wireless On/Off switch turns the WiGig radio On/Off.
● Disabled—Physical wireless On/Off switch does not turn the WiGig radio On-Off.
WirelessSwitchWlanOnlyCtrl
Determines that WLAN is controlled by the wireless On-Off switch.
Possible values:
● Enabled—Physical wireless On-Off switch can turn the WLAN On-Off.
● Disabled—Physical wireless On-Off switch cannot turn the WLAN On-Off.
WirelessWwan
Enables or disables the internal wireless WAN device.
Possible values:
● Enabled
● Disabled
WirelessSwitchWlanCtrl
Determines that WLAN and WiGig Radio is controlled by the wireless On-Off switch.
Possible values:
● Enabled—Physical wireless On-Off switch can turn the WLAN and WiGig Radio On-
Off.
● Disabled—Physical wireless On-Off switch cannot turn the WLAN and WiGig Radio
On-Off.
WirelessUwb
Enable or disables Ultra Wide Band (UWB) radio.
Possible values:
● Enabled
● Disabled
WWanBusMode
WWanBusMode sets the interface type of the Wireless Wan (WWAN) card. It is
recommended that the system running Windows must set this field to PCIe, while all the
other systems must set this field to USB.
Possible values:
● PcieMode
● UsbMode
ZigBee
Enables or disables the ZigBee feature.
Possible values:
● Enabled
● Disabled
66 Attributes supported in Dell Command | PowerShell Provider 2.3