Reference Guide

Table 29. VirtualizationSupport (continued)
Attribute Description
Possible values:
● Auto
● Disabled
TrustExecution
Determines whether a Measured Virtual Machine Monitor (MVVM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Technology.
NOTE: TPM has to be enabled and activated. Also, Virtualization Technology and VT
for Direct I/O must be enabled to use this feature.
Possible values:
● Enabled
● Disabled
Virtualization
Enables or disables the VT technology in applicable CPUs. Trusted execution required for
Virtualization technology to be enabled.
Possible values:
● Enabled
● Disabled
VtForDirectIo
Determines whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct IO.
Possible values:
● Enabled
● Disabled
PcieLinkSpeed
Configures PCIe LinkSpeed.
Possible values:
● auto - PCIe link speed is configured based on the maximum speed supported by both
upstream and downstream devices.
● gen1 - The PCIe link speed is configured in Gen1.
● gen2 - The maximum PCIe link speed that allows to be configured is limited to Gen2.
Wireless
Table 30. Wireless
Attribute Name Description
AntennaSwitch
This setting determines the antenna usage when the system is connected to a docking
station. The option designates which wireless radio is connected to which dock antenna.
The System Antennas Only option indicates the system antennas that are used, and the
dock antennas that are not used, even when the system is docked.
When the system is undocked, the system antennas are used and this setting has no
effect.
Ant A indicates dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB
Type-C docking stations.
Possible values:
● AllInternal
● WlanWwanExt
● WlanGpsExt
64 Attributes supported in Dell Command | PowerShell Provider 2.3