Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.3 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.3
- Attributes supported in Dell Command | PowerShell Provider 2.3
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.3
- Accessing documents from the Dell EMC support site
Table 22. SystemConfiguration (continued)
Attribute Name Description
KeyboardBacklightOnAc
Disables the fade if an AC adapter is plugged in. For example, if you have set the back
light to 25 percent using KeyboardIllumination, and the system is on AC power, then the
keyboard backlight remains at 25 percent regardless of internal keyboard or touch pad
activity. This feature is in effect only if the Keyboard backlight is enabled.
Possible values:
● Enabled — Keyboard backlight fades after 10 seconds of inactivity.
● Disabled — Disables the timer that fades the backlight after 10 seconds of inactivity
if the system is running on AC power.
KeyboardIllumination
This field lets you configure the keyboard illumination brightness percentage. The
keyboard automatically illuminates when the internal keyboard, touchpad, or pointstick
are used.
Possible values:
● Auto — Sets the illumination based on ambient light level.
● Disabled — Turns off keyboard illumination.
● 25 — Sets the brightness level to 25 percent.
● Dim — Sets the brightness level to 50 percent.
● 75– Sets the brightness level to 75 percent.
●
Bright — Sets the brightness level to 100 percent.
LiquidCooler1
Enables or disables the liquid cooler 1.
Possible values:
● Enabled - Enables the liquid cooler 1.
● Disabled - Disables the liquid cooler 1.
LiquidCooler2
Enables or disables the liquid cooler 2.
Possible values:
● Enabled - Enables the liquid cooler 2.
● Disabled - Disables the liquid cooler 2.
LptMode
Determines how the parallel port on the docking station operates.
Possible values:
● Disabled — Port is disabled.
● At — Port is configured for IBM AT compatibility.
● Ps2 — Port is configured for IBM PS2 compatibility.
● Ecp — Extended Capability Port protocol.
M2PcieSsd0
Enables or disables M2 PCIE SSD 0.
Possible values:
● Enabled
● Disabled
M2PcieSsd1
Enables or disables M2 PCIE SSD 1.
Possible values:
● Enabled
● Disabled
M2PcieSsd2
Enables or disables M2 PCIE SSD 2.
Possible values:
● Enabled
● Disabled
Attributes supported in Dell Command | PowerShell Provider 2.3 45