Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.3 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.3
- Attributes supported in Dell Command | PowerShell Provider 2.3
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.3
- Accessing documents from the Dell EMC support site
Table 22. SystemConfiguration (continued)
Attribute Name Description
ForcePxeNextBoot
Enables or disables Force PXE on next boot in BIOS.
Possible values:
● Enabled — If enabled, when the BIOS boots next time, the first PXE-capable device
is inserted as the first device in the boot sequence. Enabling this value causes this
operation on the next boot only, and does not cause a change in the defined boot
sequence of the system. The BIOS chooses the first PXE-capable device as the
onboard network controller of the system, if present and enabled, or the first
bootable network device found in the standard PCI search order of the system,
whichever comes first.
● Disabled — If disabled, the boot override feature is disabled and the system boot
sequence is in effect.
FrontPowerButton
Enables or disables the front power button.
Possible values:
● Enabled
● Disabled
Hdd1FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD fan.
Possible values:
● Enabled
● Disabled
Hdd2FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD2 fan.
Possible values:
● Enabled
● Disabled
Hdd3FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD3 fan.
Possible values:
● Enabled
● Disabled
IgnitionSwitchEnable
Enables or disables the external ignition pin. Disabled by default.
Possible values:
● Enabled
● Disabled
IgnitionSwitchOnDelay
The delay is displayed in seconds when the power button event is passed to the OS to
initiate a boot of the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchOffDelay
The delay is displayed in seconds untill the power button event is passed to the OS for
shutting down the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchDebounceCycle
De-Bounce Ignition Power Switch cycle time is displayed in milli-seconds.
Possible values are from (50 - 5000). By default the value is 50ms.
42 Attributes supported in Dell Command | PowerShell Provider 2.3