Reference Guide

Table 22. SystemConfiguration (continued)
Attribute Name Description
EnabledwithISCSIBoot
EmbNic2
Controls the state of on-board LAN controller 2.
Possible values:
Disabled
EnabledPXE
Enabled
EnabledwithImageServerBoot
EnabledwithRPLBoot
EnabledwithISCSIBoot
EmbSataRaid
Configures the operating mode of the integrated SATA hard drive controller.
Possible values:
Disabled The SATA controllers are hidden.
Ata SATA is configured for ATA mode.
Ahci SATA is configured for AHCI mode.
Raid SATA is configured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice
Enables or disables the eMMC drive.
Possible values:
Enabled
Disabled
FrontBezelLEDIntensity
Controls the light intensity of system's front bezel LED.
Possible values:
Disabled
Low
Medium
Full
FrontFan
Possible values:
EnabledWhen enabled, the front fan utilizes the thermal solution of the system.
DisabledWhen disabled, thermal solution of the system utilizes only the fan from
the back panel.
FingerprintReader
Enables or disables the Fingerprint Reader device.
Possible values:
Enabled - Fingerprint Reader device is enabled.
Disabled - Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn
Enables or disables the FingerprintReaderSingleSignOn.
Possible values:
Enabled - FingerprintReaderSingleSignOn is enabled.
Disabled - FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice
Enables or disables Preboot Execution Environment (PXE) as the first boot device for all
subsequent boots.
Possible values:
Enabled
Disabled
Attributes supported in Dell Command | PowerShell Provider 2.3 41