Reference Guide

Table 15. PowerManagement (continued)
Attribute Name Description
● Enabled
● Disabled
WwanAutoSense
Enables or disables the WWAN radio when the system is connected to a wired network.
When disconnected from the wired network, WWAN radio is re-enabled.
Possible values:
● Enabled
● Disabled
PreEnabled
Table 16. PreEnabled
Attribute Description
AmdSmartShift
Sets the AmdSmartShift.
Possible values:
● Enabled - On a discrete GPU system, AMD SmartShift allows the system’s CPU
and discrete GPU to share the power limits. This allows the potential
performance that increases within the systems power or thermal limitation,
● Disabled - AmdSmartShift feature disabled.
.
BiosConnectActivation
Configures the state of the available BiosConnect boot paths.
Possible values:
● Deactivate — BIOS setup options are not available and all BiosConnect boot
paths are disabled.
● FullActivation — BIOS Setup options are enabled and all BiosConnect boot paths
are enabled.
● LaunchpadActivationOnly — BIOS setup options are enabled and only launchpad
code path is enabled.
DashSupport
Enables and disables the support for Desktop and Mobile Architecture for System
Hardware (DASH) management through Platform Level Data Model (PLDM)
exchanges.
Possible values:
● Enabled
● Disabled
DisGpuExtDisplay
Enables or disables the platform external displays.
Possible values:
● Enabled — Allows discrete Graphics Processing Unit (dGPU) to enable the
platform external displays such as HDMI, NB DP and Type-C, etc. with the
purpose of enabling discrete graphic features such as Eyefinity, Mosaic, 10bit DP
displays, etc..
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics
Processing Unit (iGPU).
● Disabled — The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
ExpansionBay 1
Enables or disables Expansion Bay 1.
28 Attributes supported in Dell Command | PowerShell Provider 2.3