Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.3 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.3
- Attributes supported in Dell Command | PowerShell Provider 2.3
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.3
- Accessing documents from the Dell EMC support site
Table 15. PowerManagement (continued)
Attribute Name Description
● HighPerformance - This mode increases processor sustained power to produce higher
system performance, but produces more noise, increases system surface temperature,
and reduces the battery life.
PrimaryBattChargeCfg
Configures the primary battery charge mode. The selected charging mode applies to all
batteries installed in the system.
Possible values:
● Adaptive — Battery settings are adoptively optimized based on your typical battery
usage pattern.
● Standard — Charges the battery at a standard rate.
● Express — Charges the battery faster using the express charging algorithm, Dell's fast
charging technology.
● PrimAcUse — Charges the battery while plugged in, a mode preferred by the users who
operate their systems while plugged in to an external power source.
● Custom — The battery charging starts and stops based on user settings specified in
Primary Battery Custom Charge Start and Primary Battery Custom Charge End.
SfpwakeOnLan
Enables the system to power on by a special LAN signal, or by a special SFP signal.
Possible values:
● SFP - Allows the system to be powered on by special SFP signals.
● LANSFP - Allows the system to be powered on by either by LAN, or by SFP signals.
● SFPPXE - Allows the system to be powered on by SFP signals, and immediately boot to
PXE.
NOTE: This feature works only if the system is connected to AC power.
SleepMode
Determines which sleep mode to be used by the operating system.
NOTE: The BIOS can only support either Modern Standby sleep mode (connected or
disconnected), or S3 sleep mode.
Possible values:
● OSAutoSelection — Allows the operating system to select the appropriate sleep mode
automatically.
● ForceS3 — Forces the operating system to use the S3 sleep mode only.
SliceBattChargeCfg Configures the battery slice charging feature.
Possible values:
● Standard — The battery is charged over a long period of time.
● Express — Charges the battery in Express Charge mode using the express charging
algorithm, Dell's fast charging technology.
● PrimAcUse — Recommended setting for a user who primarily operates battery while
plugged in.
● Adaptive — Charges the battery in Express Charge mode using the express charging
algorithm, Dell's fast charging technology.
● Custom — Charges the battery in Express Charge mode using the express charging
algorithm, Dell's fast charging technology.
Speedshift
Enables or disables the Intel Speed Shift Technology support. Setting this option to
Enabled allows the operating system to select the appropriate processor performance
automatically.
Possible values:
● Enabled
● Disabled
TypeCPower
Configures the maximum power for type-C connector.
26 Attributes supported in Dell Command | PowerShell Provider 2.3