Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.3 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.3
- Attributes supported in Dell Command | PowerShell Provider 2.3
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.3
- Accessing documents from the Dell EMC support site
Table 15. PowerManagement (continued)
Attribute Name Description
● Enabled
● Disabled
LidSwitch
Enables or disables the lid switch functions.
Possible values:
● Enabled — OS setting determines the display behavior when lid is closed.
● Disabled — Display will not be affected when lid is closed.
ModBattChargeCfg
Configures the module bay battery charge mode.
Possible values:
● Standard — Charges the battery at a standard rate.
● Express — Charges the battery faster using the express charging algorithm, Dell's fast
charging technology
PeakShiftBatteryThreshold
Sets the value of the Peak Shift battery threshold. The acceptable value range is from 15
to 100 percent. When the Peak Shift battery threshold level is reached, the system starts
using AC power.
Possible values: Integers ranging from 15 to 100
PeakShiftCfg
Enables or disables Peak Shift configuration. Using Peak Shift, you can minimize the
consumption of AC power during the peak power usage period of the day.
Possible values:
● Enabled
● Disabled
PeakShiftDayConfiguration
Configures the days settings based on StartTime, EndTime, and ChargeStartTime. Using
Peak Shift configuration, you can minimize the consumption of AC power during the peak
power usage period of the day. You can set a start and end times for the Peak Shift period.
During this period, the system runs on battery if the battery charge is preceding the set
battery threshold value. After the Peak Shift period, the system runs on AC power without
charging the battery. The system functions normally using AC power and recharging the
battery after the specified ChargeStartTime.
Possible values:
● Enabled
● Disabled
PowerOnLidOpen
Set the PowerOnLidOpen feature.
Possible values:
● Enabled - If the feature is set to enabled, the system powers up from the off state
whenever the lid is opened. This system powers on when powered either by the AC
adapter or the system battery.
● Disabled - If the feature is set to disabled, the system does not power up from the off
state whenever the lid is opened.
PowerUsageMode Sets the system power usage modes.
Possible values:
● PowerSaver - This mode reduces processor sustained power to enhance battery life
depending on the use case. This mode may impact system performance.
● Balanced - This mode balances performance, noise, temperature, and battery life. The
default option is set to Balanced Mode.
● Performance - This mode uses the processor's typical power and utilizes discrete
graphics.
Attributes supported in Dell Command | PowerShell Provider 2.3 25