Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.4 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.4
- Attributes supported in Dell Command | PowerShell Provider 2.4
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- Connection
- Integrated Devices
- IntelSoftwareGuardExtensions
- Keyboard
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.4
- Accessing documents from the Dell EMC support site
Table 33. Wireless (continued)
Attribute Name Description
WirelessSwitchUwb Determines that UWB (Ultra Wide Band) Radio will be controlled by the wireless On-Off
switch. The following are the possible values:
● Enabled—Physical wireless On-Off switch can turn the UWB Radio On-Off.
● Disabled—Physical wireless On-Off switch cannot turn the UWB Radio On-Off.
WirelessSwitchWiGigCtrl Determines that Wireless Gigabit Alliance (WiGig) radio can be controlled by the physical
wireless On/Off switch. The following are the possible values:
● Enabled—Physical wireless On/Off switch turns the WiGig radio On/Off.
● Disabled—Physical wireless On/Off switch does not turn the WiGig radio On-Off.
WirelessSwitchWlanOnlyCtrl Determines that WLAN is controlled by the wireless On-Off switch. The following are the
possible values:
● Enabled—Physical wireless On-Off switch can turn the WLAN On-Off.
● Disabled—Physical wireless On-Off switch cannot turn the WLAN On-Off.
WirelessWwan Enables or disables the internal wireless WAN device. The following are the possible
values:
● Enabled
● Disabled
WirelessSwitchWlanCtrl Determines that WLAN and WiGig Radio is controlled by the wireless On-Off switch. The
following are the possible values:
● Enabled—Physical wireless On-Off switch can turn the WLAN and WiGig Radio On-
Off.
● Disabled—Physical wireless On-Off switch cannot turn the WLAN and WiGig Radio
On-Off.
WirelessUwb Enable or disables Ultra Wide Band (UWB) radio. The following are the possible values:
● Enabled
● Disabled
WWanBusMode WWanBusMode sets the interface type of the Wireless Wan (WWAN) card. It is
recommended that the system running Windows must set this field to PCIe, while all the
other systems must set this field to USB. The following are the possible values:
● PcieMode
● UsbMode
ZigBee Enables or disables the ZigBee feature. The following are the possible values:
● Enabled
● Disabled
Attributes supported in Dell Command | PowerShell Provider 2.4 57