Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.4 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.4
- Attributes supported in Dell Command | PowerShell Provider 2.4
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- Connection
- Integrated Devices
- IntelSoftwareGuardExtensions
- Keyboard
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.4
- Accessing documents from the Dell EMC support site
Wireless
Table 33. Wireless
Attribute Name Description
AntennaSwitch This setting determines the antenna usage when the system is connected to a docking
station. The option designates which wireless radio is connected to which dock antenna.
The System Antennas Only option indicates the system antennas that are used, and the
dock antennas that are not used, even when the system is docked. When the system is
undocked, the system antennas are used and this setting has no effect. Ant A indicates
dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB
Type-C docking stations.
The following are the possible values:
● AllInternal
●
WlanWwanExt
● WlanGpsExt
● WwanGpsExt
● WlanExt
● WwanExt
● GpsExt
BluetoothDevice Enables or disables the internal Bluetooth device. The following are the possible values:
● Enabled
● Disabled
DynamicWirelessTransmitPowe
r
When enabled, the system increases the power transmission capability of the WLAN
device. This improves the performance in the system configurations within the regulatory
validated guidelines. The following are the possible values:
● Enabled
● Disabled
LidMountedWirelessActivityLE
D
This additional LED is mounted in the lid in a visible position. The following are the possible
values:
● Always Off—The LED always stays off irrespective of network activity.
● LED Indicates Wireless Activity Status—The LED becomes active whenever any of the
wireless devices are capable of connecting to a wireless network. Wireless activity is
defined as the following three inputs:
○ WWAN activity
○ Bluetooth activity
○ Wi-Fi activity
WirelessLan Enables or disables the internal wireless LAN device. The following are the possible values:
● Enabled
● Disabled
WirelessSwitchBluetoothCtrl Determines that bluetooth is controlled by the wireless On-Off switch. The following are
the possible values:
● Enabled—Physical wireless On-Off switch can turn the bluetooth On-Off.
● Disabled—Physical wireless On-Off switch cannot turn the bluetooth On-Off.
WirelessSwitchGps Determines that GPS radio of WWAN device is controlled by the wireless On-Off switch.
The following are the possible values:
● Enabled—Physical wireless On-Off switch can turn the GPS On or Off.
● Disabled—Physical wireless On-Off switch cannot turn the GPS On or Off.
WirelessSwitchCellularCtrl Determines that WWAN is controlled by the wireless On-Off switch. The following are the
possible values:
● Enabled—Physical wireless On-Off switch can turn the WWAN On-Off.
● Disabled—Physical wireless On-Off switch cannot turn the WWAN On-Off.
56 Attributes supported in Dell Command | PowerShell Provider 2.4