Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.4 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.4
- Attributes supported in Dell Command | PowerShell Provider 2.4
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- Connection
- Integrated Devices
- IntelSoftwareGuardExtensions
- Keyboard
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.4
- Accessing documents from the Dell EMC support site
Table 25. SystemConfiguration (continued)
Attribute Name Description
DustFilter Enables or disables the BIOS messages for maintaining the optional dust filter installed in
the computer. BIOS generates a pre-boot reminder to clean or replace the dust filter
based on the interval settings. The following are the possible values: Disabled, 15days,
30days, 60days, 90days, 120days, 150days, 180days.
EmbNic1 Controls the state of on-board LAN controller 1. The following are the possible values:
● Disabled
● Enabled
● EnabledPxe
● OnWithImageServerBoot
● EnabledwithRPLBoot
● EnabledwithISCSIBoot
EmbNic2 Controls the state of on-board LAN controller 2. The following are the possible values:
● Disabled
● EnabledPXE
● Enabled
● EnabledwithImageServerBoot
● EnabledwithRPLBoot
● EnabledwithISCSIBoot
EmbSataRaid Configures the operating mode of the integrated SATA hard drive controller. The
following are the possible values:
● Disabled—The SATA controllers are hidden.
● Ata—SATA is configured for ATA mode.
● Ahci—SATA is configured for AHCI mode.
● Raid—SATA is configured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice Enables or disables the eMMC drive. The following are the possible values:
● Enabled
● Disabled
FrontBezelLEDIntensity Controls the light intensity of system's front bezel LED. The following are the possible
values:
● Disabled
● Low
● Medium
● Full
FrontFan The following are the possible values:
● Enabled—When enabled, the front fan utilizes the thermal solution of the system.
● Disabled—When disabled, thermal solution of the system utilizes only the fan from
the back panel.
FingerprintReader Enables or disables the Fingerprint Reader device. The following are the possible values:
● Enabled—Fingerprint Reader device is enabled.
● Disabled—Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn Enables or disables the FingerprintReaderSingleSignOn. The following are the possible
values:
● Enabled—FingerprintReaderSingleSignOn is enabled.
● Disabled—FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice Enables or disables Preboot Execution Environment (PXE) as the first boot device for all
subsequent boots. The following are the possible values:
● Enabled
● Disabled
ForcePxeNextBoot Enables or disables Force PXE on next boot in BIOS. The following are the possible
values:
Attributes supported in Dell Command | PowerShell Provider 2.4 37