Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.4 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.4
- Attributes supported in Dell Command | PowerShell Provider 2.4
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- Connection
- Integrated Devices
- IntelSoftwareGuardExtensions
- Keyboard
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.4
- Accessing documents from the Dell EMC support site
Table 18. PowerManagement (continued)
Attribute Name Description
● Disabled
PreEnabled
Table 19. PreEnabled
Attribute Description
AmdSmartShift Sets the AmdSmartShift. The following are the possible values:
● Enabled—On a discrete GPU system, AMD SmartShift allows the system’s CPU
and discrete GPU to share the power limits. This allows the potential
performance that increases within the systems power or thermal limitation,
● Disabled—AmdSmartShift feature disabled. .
BiosConnectActivation Configures the state of the available BiosConnect boot paths. The following are the
possible values:
● Deactivate—BIOS setup options are not available and all BiosConnect boot paths
are disabled.
● FullActivation—BIOS Setup options are enabled and all BiosConnect boot paths
are enabled.
● LaunchpadActivationOnly—BIOS setup options are enabled and only launchpad
code path is enabled.
DashSupport Enables and disables the support for Desktop and Mobile Architecture for System
Hardware (DASH) management through Platform Level Data Model (PLDM)
exchanges. The following are the possible values:
● Enabled
● Disabled
DisGpuExtDisplay Enables or disables the platform external displays. The following are the possible
values:
● Enabled—Allows discrete Graphics Processing Unit (dGPU) to enable the
platform external displays such as HDMI, NB DP and Type-C, etc. with the
purpose of enabling discrete graphic features such as Eyefinity, Mosaic, 10bit DP
displays, etc..
NOTE: Embedded Display Port (eDP) will be enabled by Integrated Graphics
Processing Unit (iGPU).
● Disabled—The normal hybrid graphics mode is enabled.
NOTE: This feature is used in hybrid graphics mode only.
ExpansionBay 1 Enables or disables Expansion Bay 1. The following are the possible values:
● Enabled
● Disabled
ExpansionBay 2 Enables or disables Expansion Bay 2. The following are the possible values:
● Enabled
● Disabled
ExpansionBay 3 Enables or disables Expansion Bay 3. The following are the possible values:
● Enabled
● Disabled
FaultTolerantMemLogClear Enables or disables the Fault Tolerant Memory Log Clear option. The following are
the possible values:
● Enabled—System clears fault tolerant memory log during the next boot.
● Disabled—Fault Tolerant Memory Log Clear option will be disabled, and no action
will be taken during the next boot.
26 Attributes supported in Dell Command | PowerShell Provider 2.4