Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.4 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.4
- Attributes supported in Dell Command | PowerShell Provider 2.4
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- Connection
- Integrated Devices
- IntelSoftwareGuardExtensions
- Keyboard
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Passwords
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.4
- Accessing documents from the Dell EMC support site
Table 17. POSTBehavior (continued)
Attribute Name Description
SignOfLifeIndication During POST, system acknowledges that the power button has been pressed in a manner
that the user can either hear or feel. The following are the possible values:
● Enabled
● Disabled
WarningsAndErr During POST the system continues to boot, or pauses when warnings or errors are
detected. This feature can be used for the remotely managed systems that does not have
a keyboard or a console for the user to respond. The following are the possible values:
● PromptWrnErr—System pauses for the user to respond when warnings or errors are
detected.
● ContWrn—System continues to boot when warnings are detected, but pauses for the
user to respond when errors are detected.
● ContWrnErr—System continues to boot when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the system hardware always pause
the system.
WyseP25Access Enables or disables the WyseP25Access feature. The following are the possible values:
● Enabled—Allows remote access to BIOS setup through Dell Wyse P25, Dell Wyse P45,
or through any other compatible portal.
● Disabled—Restricts remote access to BIOS setup through Dell Wyse P25, Dell Wyse
P45, or through any other compatible portal.
CAUTION: If Dell Wyse P25 BIOS Access feature is disabled, it cannot be
enabled remotely through the Dell Wyse P25, Dell Wyse P45, or through any
other compatible portal. Disabling this feature prevents keyboard access to
Diagnostics, Safe Mode, Boot Options, and other Pre-OS functionalities.
NOTE: This feature is enabled by default.
PowerManagement
Table 18. PowerManagement
Attribute Name Description
AcPwrRcvry Controls the system's behavior when AC power is restored after AC power has been lost.
The following are the possible values:
● Off—System stays off after AC power is restored.
● On—System powers on after AC power is restored.
● Last—System returns to the previous state after AC power recovery.
AdvancedBatteryChargeConfi
guration
Configures the days settings based on BeginningOfDay and workperiod. Advanced Battery
charge mode uses standard charging algorithm and other methods during working hours to
maximize battery health. During working hours, express charge is used to charge the
batteries faster. You can configure the days and the work period during which the battery
has to be charged. To enable advanced battery charging, provide the day. The following
are the possible values:
● BeginningOfDay—To configure the AdvanceBatteryCharge start time in 24 hours
format. The value of hour must be in the range 0–23 and minute must be 0, 15, 30, or
45.
● Workperiod—To configure the duration of charging.
AdvBatteryChargeCfg Enables or disables the Advanced Battery Charge configuration. During working hours, with
the Advanced Battery Charge configuration, the batteries can be charged faster using
ExpressCharge. The following are the possible values:
● Enabled
● Disabled
20 Attributes supported in Dell Command | PowerShell Provider 2.4