Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 7. IntelSoftwareGuardExtensions (continued)
Attribute Name Description
● Change this feature to SoftControlled if the current state is
Enabled
NOTE: One of the methods of configuring Software Guard Extensions (SGX)
feature is from the BIOS setup screen.
Manageability
Table 8. Manageability
Attribute Description
AmtCap
Set the intel active management technology (AMT) capability.
Possible Values:
● Enabled - If Intel Active Management Technology is enabled, MEBx is available
through the F12 menu and you can provision AMT. MEBx may not be not
accessible if OROM Keyboard Access is disabled.
● Disabled - If Intel Active Management Technology is disabled, MEBx is not
available in pre-boot. Once disabled, Intel Active Management Technology can
only be enabled through the BIOS interface. If the Intel AMT is already
provisioned, AMT cannot be disabled. Un-provisioning AMT is required to disable
AMT.
● Restrict MEBx Access - If Intel Active Management Technology is enabled,
MEBx is not available in pre-boot, but you can provision AMT from the operating
systems.
PostMebxKey
MEBx stands for Intel Management Engine BIOS Extension. Enables or disables the
MEBx hotkey function when the system boots.
● Enabled
● Disabled
UsbProvision
Enables or disables provisioning of Intel AMT from a USB storage device.
Possible values:
● Enabled — Intel AMT can be provisioned using the local provisioning file via a
USB storage device.
● Disabled — Provisioning of Intel AMT from a USB storage device is blocked.
Maintenance
Table 9. Maintenance
Attribute Name Description
AllowBIOSDowngrade
Allows or restricts downgrading of the system BIOS.
CAUTION: You cannot enable the Allow BIOS Downgrade feature using the
Dell Command | PowerShell Provider.
NOTE: One of the methods of enabling the Allow BIOS Downgrade feature is from
the BIOS setup screen.
Possible values:
● Enabled — Allows the system to downgrade the system BIOS.
● Disabled — Restricts the system to downgrade the system BIOS.
Attributes supported in Dell Command | PowerShell Provider 2.2 9