Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 2. AdvancedBootOptions (continued)
Attribute Name Description
UefiBootPathSecurity
Determines whether the system should prompt the user to enter the Admin password, if
set, while booting from a UEFI boot path from the F12 Boot Menu.
Possible values:
● AlwaysExceptInternalHdd — All UEFI boot paths require the user to enter the Admin
password, except for the boot paths that are hosted on an internal hard disk drives.
● Always — Booting from any UEFI boot path requires the user to enter the Admin
password.
● Never — The Admin password is not required for booting from UEFI boot paths.
● AlwaysExceptInternalHddPxe — All UEFI boot paths require the Admin password,
except for boot paths hosted on internal hard disk drives or PXE Boot.
AdvancedConfigurations
Table 3. AdvancedConfigurations
Attribute Name Description
Aspm
Set the ASPM (Active State Power Management) level.
Possible values:
● Auto — There is handshaking between the device and PCI Express hub to determine
the best ASPM mode supported by the device.
● Disabled — ASPM power management is turned off always.
● L1 — ASPM power management is set to use L1.
OneTBSystemMemoryLimitEna
ble
Confines the system memory to less than 1 TB when more than 1TB memory is installed in
the computer.
Possible values:
● Enabled
● Disabled
BatteryInformation
Table 4. BatteryInformation
Attribute Name Description
PercentCharged
Displays the charged percentage of the battery.
Possible values: Read-only
BIOSSetupAdvancedMode
Table 5. BIOSSetupAdvancedMode
Attribute Name Description
AdvancedMode
Enabling BIOS Setup Advanced Mode makes all BIOS settings visible.
Possible values:
● Enabled
● Disabled
Attributes supported in Dell Command | PowerShell Provider 2.2 7