Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 28. VirtualizationSupport (continued)
Attribute Description
● auto - PCIe link speed is configured based on the maximum speed supported by both
upstream and downstream devices.
● gen1 - The PCIe link speed is configured in Gen1.
● gen2 - The maximum PCIe link speed that allows to be configured is limited to Gen2.
Wireless
Table 29. Wireless
Attribute Name Description
BluetoothDevice
Enables or disables the internal Bluetooth device.
Possible values:
● Enabled
● Disabled
LidMountedWirelessActivityLE
D
This additional LED is mounted in the lid in a visible position.
Possible values:
● Always Off — The LED always stays off irrespective of network activity.
● LED Indicates Wireless Activity Status — The LED becomes active whenever any of
the wireless devices are capable of connecting to a wireless network. Wireless activity
is defined as the following three inputs:
○ WWAN activity
○ Bluetooth activity
○ Wi-Fi activity
WirelessLan
Enables or disables the internal wireless LAN device.
Possible values:
● Enabled
● Disabled
WirelessSwitchBluetoothCtrl
Determines that bluetooth is controlled by the wireless On-Off switch.
Possible values:
● Enabled — Physical wireless On-Off switch can turn the bluetooth On-Off.
● Disabled — Physical wireless On-Off switch will not be able to turn the bluetooth On-
Off.
WirelessSwitchGps
Determines that GPS radio of WWAN device is controlled by the wireless On-Off switch.
Possible values:
● Enabled — Physical wireless On-Off switch can turn the GPS On or Off.
● Disabled — Physical wireless On-Off switch will not be able to turn the GPS On or
Off.
WirelessSwitchCellularCtrl
Determines that WWAN is controlled by the wireless On-Off switch.
Possible values:
● Enabled — Physical wireless On-Off switch can turn the WWAN On-Off.
● Disabled — Physical wireless On-Off switch will not be able to turn the WWAN On-
Off.
WirelessSwitchUwb
Determines that UWB (Ultra Wide Band) Radio will be controlled by the wireless On-Off
switch.
Possible values:
Attributes supported in Dell Command | PowerShell Provider 2.2 61