Reference Guide

VirtualizationSupport
Table 28. VirtualizationSupport
Attribute Description
AmdVtEnable
This field specifies whether the Virtual Machine Monitor (VMM) utilizes the additional
hardware capabilities provided by AMD-V Technology.
Possible values:
● Enabled
● Disabled
AmdViEnable
This field specifies whether the Virtual Machine Monitor (VMM) utilizes the additional
hardware capabilities provided by AMD-Vi Technology.
Possible values:
● Enabled
● Disabled
IntelVMDTechnology
Enables or disables the Intel Volume Management Device (VMD) technology. Selecting
Auto Enables VMD for any PCIe SSD connected to PCIe root ports. If the Auto option is
not selected, then it disables VMD for all ports. SSD works only as native NVMe device.
Possible values:
● Auto
● Disabled
VmdPcieSlot
Enables or disables the Intel Volume Management Device (VMD) technology Pcie slot.
Selecting Auto Enables VMD for any PCIe SSD connected to PCIe root ports. If the Auto
option is not selected, then it disables VMD for all ports. SSD works only as native NVMe
device.
Possible values:
● Auto
● Disabled
TrustExecution
Determines whether a Measured Virtual Machine Monitor (MVVM) can utilize the
additional hardware capabilities provided by the Intel Trusted Execution Technology.
NOTE: TPM has to be enabled and activated. Also, Virtualization Technology and VT
for Direct I/O must be enabled to use this feature.
Possible values:
● Enabled
● Disabled
Virtualization
Enables or disables the VT technology in applicable CPUs. Trusted execution required for
Virtualization technology to be enabled.
Possible values:
● Enabled
● Disabled
VtForDirectIo
Determines whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities provided by Intel Virtualization Technology for Direct IO.
Possible values:
● Enabled
● Disabled
PcieLinkSpeed
Configures PCIe LinkSpeed.
Possible values:
60 Attributes supported in Dell Command | PowerShell Provider 2.2