Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 22. SystemInformation (continued)
Attribute Name Description
Possible values: Read-only
SvcTag
The service tag is the system’s serial number that uniquely identifies the Dell system.
Possible values: Read-only
SystemLogs
Table 23. SystemLogs
Attribute Name Description
BiosLogClear
Prevents or allows the system event log to be cleared on the next boot.
Possible values:
● Keep — Does not clear the system event log on the next boot.
● Clear — Clears the system event log on the next boot.
PowerLogClear
Prevents or allows the power event log to be cleared on the next boot.
Possible values:
● Keep — Does not clear the power event log on the next boot.
● Clear — Clears the power event log on the next boot.
ThermalLogClear
Prevents or allows the thermal event log to be cleared on the next boot.
Possible values:
● Keep — Does not clear the thermal event log on the next boot.
● Clear — Clears the thermal event log on the next boot.
ThermalConfiguration
Table 24. ThermalConfiguration
Attribute Name Description
FanSpdAutoLvlonCpuZone
Sets the speed of the fan on CPU zone
Possible values:
● 0 to 100
FanSpdAutoLvlonPsuZone
Sets the speed of the fan on PSU zone
Possible values:
● 0 to 100
FanSpdAutoLvlonCpuMemZone
Sets the speed of the fan on CPU memory zone
Possible values:
● 0 to 100
FanSpdAutoLvlonPcieZone
Sets the speed of the fan on PCIe zone
Possible values:
● 0 to 100
FanSpdAutoLvlonFlexBayZone
Sets the speed of the fan on Flex Bay zone
50 Attributes supported in Dell Command | PowerShell Provider 2.2