Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 21. SystemConfiguration (continued)
Attribute Name Description
UefiNwStack
This option is disabled by default. If enabled, UEFI Networking protocols are installed/
available, allowing pre-OS and early OS networking features to use the enabled NICs.
This option may be used without turning on PXE.
Possible values:
● Enabled
● Disabled
UnobtrusiveMode
Enables or disables the toggling of light emissions using hotkey Fn+B.
Possible values:
● Enabled — Pressing Fn+B will toggle light emissions from the system.
● Disabled — Pressing Fn+B keys has no effect and will not toggle light emissions from
the system.
UsbPowerShare
Configures the USB PowerShare feature behavior.
Possible values:
● Enabled — Charges the external devices, such as phones and laptop music players,
using the stored system battery when the system is turned off or in sleep mode. This
feature works only if:
○ The device is connected through the USB PowerShare port on the laptop.
○ The system is connected to an AC power source.
○ The battery charge is less than 50 percent.
● Disabled — Turns off this feature, and devices attached to the USB PowerShare port
will not be charged when the system is in a sleep mode or turned off.
Vmdnvmepcie0
Enables or disables the VMD for Front NVMe Port (PCIE0).
Possible values:
● Enabled
● Disabled
Vmdnvmepcie1
Enables or disables the VMD for Front NVMe Port (PCIE1).
Possible values:
● Enabled
● Disabled
Vmdnvmepcie0cpu1
Enables or disables the VMD for Front NVMe Port (PCIE0-CPU1).
Possible values:
● Enabled
● Disabled
Vmdnvmepcie1cpu1
Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1).
Possible values:
● Enabled
● Disabled
Vmdpcieslot
Enables or disables the VMD for PCIe Slot.
Possible values:
● Enabled
● Disabled
WatchdogTimer
Enables or disables the system to reboot or reset when the watchdog time expires.
Possible values:
48 Attributes supported in Dell Command | PowerShell Provider 2.2