Reference Guide

Table 21. SystemConfiguration (continued)
Attribute Name Description
Hdd2FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD2 fan.
Possible values:
● Enabled
● Disabled
Hdd3FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD3 fan.
Possible values:
● Enabled
● Disabled
IgnitionSwitchEnable
Enables or disables the external ignition pin. Disabled by default.
Possible values:
● Enabled
● Disabled
IgnitionSwitchOnDelay
The delay is displayed in seconds when the power button event is passed to the OS to
initiate a boot of the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchOffDelay
The delay is displayed in seconds untill the power button event is passed to the OS for
shutting down the system.
Possible values are from (0 - 21600). By default the value is 5s.
IgnitionSwitchDebounceCycle
De-Bounce Ignition Power Switch cycle time is displayed in milli-seconds.
Possible values are from (50 - 5000). By default the value is 50ms.
IntegratedAudio
Enables or disables the integrated audio controller.
Possible values:
● Enabled
● Disabled
● Auto
IntegratedSas
Enables or disables the integrated Serial Attached SCSI (SAS) controller.
NOTE: This option affects the SAS RAID controller Only. This controller operates the
connectors on the motherboard that are marked SASA and SASB.
Possible values:
● Enabled
● Disabled
InternalSpeaker
Enables or disables the built-in speaker.
Possible values:
● Enabled
● Disabled
● Low
● Medium
● High
40 Attributes supported in Dell Command | PowerShell Provider 2.2