Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 21. SystemConfiguration (continued)
Attribute Name Description
● Disabled — The SATA controllers are hidden.
● Ata — SATA is configured for ATA mode.
● Ahci — SATA is configured for AHCI mode.
● Raid — SATA is configured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice
Enables or disables the eMMC drive.
Possible values:
● Enabled
● Disabled
FingerprintReader
Enables or disables the Fingerprint Reader device.
Possible values:
● Enabled - Fingerprint Reader device is enabled.
● Disabled - Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn
Enables or disables the FingerprintReaderSingleSignOn.
Possible values:
● Enabled - FingerprintReaderSingleSignOn is enabled.
● Disabled - FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice
Enables or disables Preboot Execution Environment (PXE) as the first boot device for all
subsequent boots.
Possible values:
● Enabled
● Disabled
ForcePxeNextBoot
Enables or disables Force PXE on next boot in BIOS.
Possible values:
● Enabled — If enabled, when the BIOS boots next time, the first PXE-capable device
is inserted as the first device in the boot sequence. Enabling this value causes this
operation on the next boot only, and does not cause a change in the defined boot
sequence of the system. The BIOS chooses the first PXE-capable device as the
onboard network controller of the system, if present and enabled, or the first
bootable network device found in the standard PCI search order of the system,
whichever comes first.
● Disabled — If disabled, the boot override feature is disabled and the system boot
sequence is in effect.
FrontPowerButton
Enables or disables the front power button.
Possible values:
● Enabled
● Disabled
Hdd1FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is
detected, this function is automatically enabled. Disabling the fan requires physical
removal of the HDD fan.
Possible values:
● Enabled
● Disabled
Attributes supported in Dell Command | PowerShell Provider 2.2 39