Reference Guide

Table 13. POSTBehavior (continued)
Attribute Name Description
FnLockMode
If Enabled, F1 to F12 keys behave as function keys holding Fn key is required to access
their secondary functions. Without holding Fn key, the dual function keys behave as
normally labeled.
Possible values:
● EnableSecondary
● DisableStandard
FullScreenLogo
Enables or disables the full screen logo that appears during BIOS POST.
Possible values:
● Enabled
● Disabled
Keypad
Activates the internal keyboard's embedded keypad either when Numlock LED is on or
when the Fn key is pressed.
NOTE: When Setup is running, this option has no effect, Setup works in the
EnabledByFnKey mode.
Possible values:
● EnabledByFnKey — The keypad is enabled only when you hold the Fn key.
● EnabledByNumLock — The keypad is enabled when, the Numlock LED is On and no
external keyboard is attached.
MacAddrPassThru
This feature replaces the external NIC MAC address (in a supported dock or dongle) with
the selected MAC address from the system. The default value is the System Unique MAC
Address.
Possible values:
● SystemUnique
● IntegratedNic1
● Disabled
NumLock
Enables or disables the NumLock function when the system boots.
Possible values:
● Enabled
● Disabled
NumLockLed
Enables or disables the NumLockLed function when the system boots.
Possible values:
● Enabled
● Disabled
PntDevice
Defines how the system handles mouse and touchpad input.
Possible values:
● SerialMouse — Uses a serial mouse and disables the internal touchpad.
● Ps2Mouse — Disables the integrated touchpad when an external PS2 mouse is
present.
● Touchpad — Leave the integrated touchpad enabled when an external PS2 mouse is
present.
● SwitchToExternalPS2 — Sets the pointing device to switch to external ps2.
PostF12Key
Enables or disables <F12> Boot Menu on POST boot screen.
Possible values:
● Enabled — Enables F12 Boot Option Menu.
18 Attributes supported in Dell Command | PowerShell Provider 2.2