Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 11. MiscellaneousDevices (continued)
Attribute Name Description
● Disabled
SdCardBoot
Enables or disables booting the system from an SD card.
Possible values:
● Enabled — Allows the system to boot from an SD card.
● Disabled — Prevents the system from detecting or boot from the SD card.
SdCardReadOnly
Enables or disables the read-only mode for SD card.
Possible values:
● Enabled
● Disabled
Performance
Table 12. Performance
Attribute Name Description
AdjCachePrefetch
Enables or disables the AdjacentCacheLinePrefetch feature.
Possible values:
● Enabled - CPU fetches the adjacent cache line in the other half of the sector.
● Disabled - CPU only fetches the cache line that contains the data currently required
by the CPU.
CPUCore
This field specifies whether the processor has one or more cores enabled. The
performance of some applications improve with additional cores.
Possible values:
● CoresAll— All cores are enabled.
● Cores1 — Only one core is enabled.
● Cores2 — Two cores are enabled.
● Cores3 — Three cores are enabled.
● Cores4 — Four cores are enabled.
● Cores5 — Five cores are enabled.
● Cores6 — Six cores are enabled.
● Cores7 — Seven cores are enabled.
● Cores8 — Eight cores are enabled.
● Cores9 — Nine cores are enabled.
● Cores10 — Ten cores are enabled.
● Cores11 — Eleven cores are enabled.
● Cores12 — Twelve cores are enabled.
● Cores13 — Thirteen cores are enabled.
● Cores14 — Fourteen cores are enabled.
● Cores15 — Fifteen cores are enabled.
● Cores16 — Sixteen cores are enabled.
● Cores17 — Seventeen cores are enabled.
● Cores18 — Eighteen cores are enabled.
● Cores19 — Nineteen cores are enabled.
● Cores20 — Twenty cores are enabled.
● Cores21 — Twenty one cores are enabled.
● Cores22 — Twenty two cores are enabled.
● Cores23 — Twenty three cores are enabled.
Attributes supported in Dell Command | PowerShell Provider 2.2
13