Reference Guide
Table Of Contents
- Dell Command | PowerShell Provider Version 2.2 Reference Guide
- Introduction to Dell Command | PowerShell Provider 2.2
- Attributes supported in Dell Command | PowerShell Provider 2.2
- AdvancedBootOptions
- AdvancedConfigurations
- BatteryInformation
- BIOSSetupAdvancedMode
- BootSequence
- IntelSoftwareGuardExtensions
- Manageability
- Maintenance
- MemoryInformation
- MiscellaneousDevices
- Performance
- POSTBehavior
- PowerManagement
- PreEnabled
- ProcessorInformation
- SecureBoot
- Security
- StealthModeControl
- SupportAssistSystemResolution
- SystemConfiguration
- SystemInformation
- SystemLogs
- ThermalConfiguration
- TPMSecurity
- USBConfiguration
- Video
- VirtualizationSupport
- Wireless
- Error reporting in Dell Command | PowerShell Provider 2.2
- Accessing documents from the Dell EMC support site
Table 9. Maintenance (continued)
Attribute Name Description
BiosAutoRcvr
Enables or disables BIOS auto recovery feature.
Possible values:
● Enabled — If BIOS corruption is detected, the system automatically recovers BIOS
without any user interaction.
● Disabled — Disables BIOS auto recovery feature.
NOTE: You can enable this option only if BiosRcvrFrmHdd option is enabled.
BiosIntegrityCheck
Enables or disables the BIOS integrity check during the booting process.
Possible values:
● Enabled — BIOS checks the BIOS image integrity during every booting process.
● Disabled — BIOS checks the BIOS image integrity only if the previous booting process
did not complete.
NOTE: BIOS checks the BIOS image integrity only if the BiosAutoRcvr option is
enabled.
BiosRcvrFrmHdd
Enables or disables the system BIOS Recovery option. This feature saves a recovery
image to a primary hard disk drive storage, or to an external USB, and uses this recovery
image to recover the BIOS image when system BIOS fails.
Possible values:
● Enabled — BIOS stores the recovery image on a primary hard disk drive storage. So
the BIOS recovery image is available both from the primary hard disk drive permanent
storage and via an external USB.
● Disabled — BIOS does not store the recovery image on primary hard disk drive
storage. So the BIOS recovery image is available only via an external USB.
Serr
Enables or disables the SERR on the DRAM controller and the PEG controller in the north
bridge.
Possible values:
● Disabled — Disable the SERR DMI messaging mechanism.
● Enabled — Allows SERR messages to be generated.
MemoryInformation
Table 10. MemoryInformation
Attribute Name Description
DIMMASize
Displays the amount of main memory physically installed in the DIMM slot A.
Possible Values: Read-only
DIMMBSize
Displays the amount of main memory physically installed in the DIMM slot B.
Possible Values: Read-only
DIMMCSize
Displays the amount of main memory physically installed in the DIMM slot C.
Possible Values: Read-only
DIMMDSize
Displays the amount of main memory physically installed in the DIMM slot D.
Possible Values: Read-only
MemoryAvailable
Displays the amount of main memory available to the operating system.
10 Attributes supported in Dell Command | PowerShell Provider 2.2