Reference Guide

Attribute Name Description
Ant A indicates dock antenna A, and Ant B indicates dock antenna B.
NOTE: This setting applies to rugged docking stations and does not apply to USB
Type-C docking stations.
Possible values:
• AllInternal
• WlanWwanExt
• WlanGpsExt
• WwanGpsExt
• WlanExt
• WwanExt
• GpsExt
BluetoothDevice
Enables or disables the internal Bluetooth device.
Possible values:
• Enabled
• Disabled
DynamicWirelessTransmitPower When enabled, the system increases the power transmission capability of the WLAN device. This
improves the performance in the system configurations within the regulatory validated guidelines.
Possible values:
• Enabled
• Disabled
LidMountedWirelessActivityLED
This additional LED is mounted in the lid in a visible position.
Possible values:
• Always Off—The LED always stays off irrespective of network activity.
• LED Indicates Wireless Activity Status—The LED becomes active whenever any of the
wireless devices are capable of connecting to a wireless network. Wireless activity is defined
as the following three inputs:
• WWAN activity
• Bluetooth activity
• Wi-Fi activity
WirelessLan
Enables or disables the internal wireless LAN device.
Possible values:
• Enabled
• Disabled
WirelessSwitchBluetoothCtrl
Determines that bluetooth is controlled by the wireless On-Off switch.
Possible values:
• Enabled—Physical wireless On-Off switch can turn the bluetooth On-Off.
• Disabled—Physical wireless On-Off switch cannot turn the bluetooth On-Off.
WirelessSwitchGps
Determines that GPS radio of WWAN device is controlled by the wireless On-Off switch.
Possible values:
• Enabled—Physical wireless On-Off switch can turn the GPS On or Off.
• Disabled—Physical wireless On-Off switch cannot turn the GPS On or Off.
WirelessSwitchCellularCtrl
Determines that WWAN is controlled by the wireless On-Off switch.
Possible values:
• Enabled—Physical wireless On-Off switch can turn the WWAN On-Off.
Attributes supported in Dell Command | PowerShell Provider 2.3 63