Reference Guide

Attribute Name Description
WlanRegionCode
Sets the WLAN code for specific region.
Possible values:
• rtw — (Rest of the World) Sets the WLAN region code for the rest of the world. This option
is selected by default.
• na — (North America (FCC)) Sets the WLAN region code for Canada and the United
States.
• eur — (Europe) Sets the WLAN region code for Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal,
Slovakia, Spain, Sweden, Switzerland, Turkey, and United Kingdom.
• jpn — (Japan) Sets the WLAN region code for Japan only.
• aus — (Australia) Sets the WLAN region code for Australia, New Zealand, Saudi Arabia,
South Africa, UAE, and Vietnam.
• chn — (China, South Asia) Sets the WLAN region code for China and India.
• twn — (Taiwan) Sets the WLAN region code for Colombia, Peru, and Taiwan.
• idn — (Indonesia) Sets the WLAN region code for Indonesia only.
SystemInformation
Table 23. SystemInformation
Attribute Name Description
Asset
An asset tag is a string that can be used by an IT administrator to uniquely identify a particular
system.
Possible values: String containing 0 to 14 characters.
BIOSVersion
Displays the current version of the system BIOS firmware.
Possible values: Read-only
ExpressServiceCode
The express service code is a mathematical hash applied to the service tag. The express service
code is seen in BIOS Setup and on an exterior sticker.
Possible values: Read-only
ManufatureDate
Displays the system manufacture date (mm/dd/yyyy).
Possible values: Read-only
OwnershipTag
The ownership tag is a string that can be used to display a system-specific message on the BIOS
start-up and setup screens.
Possible values: String containing 0 to 80 characters
OwnershipDate
Displays the date (mm/dd/yyyy) the system was first powered on after leaving the factory.
Possible values: Read-only
SvcTag
The service tag is the system’s serial number that uniquely identifies the Dell system.
Possible values: Read-only
SystemLogs
Table 24. SystemLogs
Attribute Name Description
BiosLogClear
Prevents or allows the system event log to be cleared on the next boot.
Possible values:
Attributes supported in Dell Command | PowerShell Provider 2.3 51