Reference Guide

Attribute Name Description
Possible values:
• Enabled — Pressing Fn+B will toggle light emissions from the system.
• Disabled — Pressing Fn+B keys has no effect and will not toggle light emissions from the
system.
UsbPowerShare
Configures the USB PowerShare feature behavior.
Possible values:
• Enabled — Charges the external devices, such as phones and laptop music players, using
the stored system battery when the system is turned off or in sleep mode. This feature
works only if:
• The device is connected through the USB PowerShare port on the laptop.
• The system is connected to an AC power source.
• The battery charge is less than 50 percent.
• Disabled — Turns off this feature, and devices attached to the USB PowerShare port will
not be charged when the system is in a sleep mode or turned off.
Vmdnvmepcie0
Enables or disables the VMD for Front NVMe Port (PCIE0).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie1
Enables or disables the VMD for Front NVMe Port (PCIE1).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie0cpu1
Enables or disables the VMD for Front NVMe Port (PCIE0-CPU1).
Possible values:
• Enabled
• Disabled
Vmdnvmepcie1cpu1
Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1).
Possible values:
• Enabled
• Disabled
Vmdpcieslot
Enables or disables the VMD for PCIe Slot.
Possible values:
• Enabled
• Disabled
WatchdogTimer
Enables or disables the system to reboot or reset when the watchdog time expires.
Possible values:
• Enabled
• Disabled
WdtOsBootProtection
Enables or disables Watchdog OS Boot Protection.
Possible values:
• Enabled - The application configures a chipset-based timer to reset or shutdown the system.
• Disabled - The application cannot configure a chipset-based timer to reset or shutdown the
system. By default the Application Watchdog Timer is disabled.
50 Attributes supported in Dell Command | PowerShell Provider 2.3