Reference Guide

Attribute Name Description
• Raid — SATA is configured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice
Enables or disables the eMMC drive.
Possible values:
• Enabled
• Disabled
FrontBezelLEDIntensity
Controls the light intensity of system's front bezel LED.
Possible values:
• Disabled
• Low
• Medium
• Full
FrontFan
Possible values:
• Enabled—When enabled, the front fan utilizes the thermal solution of the system.
• Disabled—When disabled, thermal solution of the system utilizes only the fan from the back
panel.
FingerprintReader
Enables or disables the Fingerprint Reader device.
Possible values:
• Enabled - Fingerprint Reader device is enabled.
• Disabled - Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn
Enables or disables the FingerprintReaderSingleSignOn.
Possible values:
• Enabled - FingerprintReaderSingleSignOn is enabled.
• Disabled - FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice
Enables or disables Preboot Execution Environment (PXE) as the first boot device for all
subsequent boots.
Possible values:
• Enabled
• Disabled
ForcePxeNextBoot
Enables or disables Force PXE on next boot in BIOS.
Possible values:
• Enabled — If enabled, when the BIOS boots next time, the first PXE-capable device is
inserted as the first device in the boot sequence. Enabling this value causes this operation on
the next boot only, and does not cause a change in the defined boot sequence of the
system. The BIOS chooses the first PXE-capable device as the onboard network controller
of the system, if present and enabled, or the first bootable network device found in the
standard PCI search order of the system, whichever comes first.
• Disabled — If disabled, the boot override feature is disabled and the system boot sequence
is in effect.
FrontPowerButton
Enables or disables the front power button.
Possible values:
• Enabled
• Disabled
Hdd1FanEnable
Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this
function is automatically enabled. Disabling the fan requires physical removal of the HDD fan.
40 Attributes supported in Dell Command | PowerShell Provider 2.3