Reference Guide

Attribute Name Description
Possible values:
• Enabled
• Disabled
DisWLANRadio
WLAN radio stops functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisWWANRadio
WWAN radio stops functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DockSupportOnBattery
Enabling DockSupportOnBattery allows you to use the docking station, when AC power is
absent, but only when the battery is preceding a certain charge percentage. The percentage
may change per battery and per platform. For example, the dock may only be powered when the
battery is at 60 percent charge or higher, and when the battery drops below this level (without
AC power) the dock loses power.
Possible values:
• Enabled
• Disabled
DustFilter
Enables or disables the BIOS messages for maintaining the optional dust filter installed in the
computer. BIOS generates a pre-boot reminder to clean or replace the dust filter based on the
interval settings.
Valid Arguments:
Disabled, 15days, 30days, 60days, 90days, 120days, 150days, 180days.
EmbNic1
Controls the state of on-board LAN controller 1.
Possible values:
• Disabled
• Enabled
• EnabledPxe
• OnWithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbNic2
Controls the state of on-board LAN controller 2.
Possible values:
• Disabled
• EnabledPXE
• Enabled
• EnabledwithImageServerBoot
• EnabledwithRPLBoot
• EnabledwithISCSIBoot
EmbSataRaid
Configures the operating mode of the integrated SATA hard drive controller.
Possible values:
• Disabled — The SATA controllers are hidden.
• Ata — SATA is configured for ATA mode.
• Ahci — SATA is configured for AHCI mode.
Attributes supported in Dell Command | PowerShell Provider 2.3 39