Reference Guide

Attribute Name Description
AnalogDigitalInterfaceModeChann
el8
Sets the defined Analog or Digital Interface mode for channel 8.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
BatteryFuelGauge
This feature controls the battery fuel gauge.
Possible values:
• Enabled—Enabling this feature allows the battery fuel gauge to be activated on touch or
swipe.
• Disabled—Disabling this feature prevents the battery fuel gauge from being activated on
touch or swipe.
CanBus
Enables or disables the Controller Area Network (CAN) Bus.
Possible values:
• Enabled
• Disabled
DisBluetoothRadio
Bluetooth radio stops functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisOnboardFans
Onboard fans stop functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisGPSReceiver
GPS receiver stops functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisOnboardLCDScreen
Onboard LCD screen stops functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisOnboardLEDs
Onboard LEDs stop functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisOnboardSpeakers
Onboard speakers stop functioning when stealth mode is enabled.
Possible values:
• Enabled
• Disabled
DisOsdBtn
Enables or disables the On-screen Display (OSD) buttons on All-In-One system.
38 Attributes supported in Dell Command | PowerShell Provider 2.3