Reference Guide

Attribute Name Description
AnalogDigitalInterfaceModeChann
el2
Sets the defined Analog or Digital Interface mode for channel 2.
Possible values:
• Unused—Channel is unused.
• ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChann
el3
Sets the defined Analog or Digital Interface mode for channel 3.
Possible values:
• Unused—Channel is unused.
• ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChann
el4
Sets the defined Analog or Digital Interface mode for channel 4.
Possible values:
• Unused—Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChann
el5
Sets the defined Analog or Digital Interface mode for channel 5.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChann
el6
Sets the defined Analog or Digital Interface mode for channel 6.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChann
el7
Sets the defined Analog or Digital Interface mode for channel 7.
Possible values:
• Unused — Channel is unused.
• ADCInput — Sets the channel mode as Analog-to-Digital Converter (ADC) input.
• DACOutput — Sets the channel mode as Digital-to-Analog Converter (DAC) output.
• DACAndADC — Sets the channel mode as DAC output, but can be monitored through ADC
input.
• GPIO — Sets the channel mode as General Purpose Input or Output.
Attributes supported in Dell Command | PowerShell Provider 2.3 37