Reference Guide

Attribute Name Description
Possible values:
• Enabled - If enabled, then the Absolute service is activated or deactivated.
• Disabled - If disabled, then the Absolute service does not run.
• PermanentlyDisabled - If the Absolute interface is permanently disabled, then the
Absolute feature can be enabled by using the factory reset feature.
AdminPassword
Sets, changes, or clears the administrator (admin) password (also called the setup
password). If you delete the admin password, the system password, if set, is also deleted.
Possible values: String containing minimum 4 and maximum 32 characters including
whitespace.
AdminSetupLockout
Enables or disables admin setup lockout.
Possible values:
• Enabled
• Disabled
AmdTSME
Possible values:
• Enabled - AMD Transparent Secure Memory Encryption (TSME) allows encryption of
contents on the memory DIMMS.
NOTE: For best results while diagnosing potential memory DIMM issues,
turn off this feature prior to running diagnostic functions or tools.
• Disabled - AMD Transparent Secure Memory Encryption (TSME) does not allow
encryption on the memory DIMMS.
CapsuleFirmwareUpdate
Enables or disables BIOS updates via UEFI capsule update packages.
Possible values:
• Enabled
• Disabled
ChasIntrusion
The chassis intrusion switch is a physical switch which triggers an event when the chassis is
opened.
Possible values:
• Enabled — The system detects and reports chassis intrusion events to the system
display on boot-up.
• Disabled — The system does not detect and report the Chassis Intrusion events to the
system display on boot-up.
• SilentEnable — The system detects, but does not report the Chassis Intrusion events to
the system display on boot-up.
ChassisIntrusionStatus
Displays the status of chassis intrusion.
NOTE: Except TripReset, all values are read-only.
Possible values:
• DoorOpen — Indicates that chassis door is open.
• Tripped — Indicates that the chassis door was opened since the last time the sensor-
detection logic was reset.
• DoorClosed — Indicates that chassis door is closed.
• TripReset — Resets the sensor-detection logic to detect the next closed-to-open
transition on the chassis door.
Computrace
This feature allows the users to enable or disable Absolute Software's Computrace security
software BIOS ROM. After this token is written, the state is permanently maintained (this is
a write-once field). This token is for Factory use only. Application and management software
must ignore this token. Write-once permanent is different from write-once. Write-once is
Attributes supported in Dell Command | PowerShell Provider 2.3 31