Reference Guide

Attribute Name Description
CurrentClockSpeed
Displays the current speed of the processor.
Possible values: Read-only
HTCapable
Specifies whether the system supports Hyper Threading (HT).
Possible values: Read-only
MaximumClockSpeed
Displays the maximum speed supported by the processor.
Possible values: Read-only
ProcessorID
Displays the processor ID that contains the processor-specific information that describes the
features of the processor.
Possible values: Read-only
ProcessorL2Cache
Displays the L2 cache size.
Possible values: Read-only
ProcessorL3Cache
Displays the L3 cache size.
Possible values: Read-only
ProcessorType
Displays the brand information of the processor installed on the system.
Possible values: Read-only
SecureBoot
Table 18. SecureBoot
Attribute Name Description
SecureBoot
Enables or disables the SecureBoot feature. For SecureBoot to be enabled, the system needs to
be in UEFI boot mode, and the Enable Legacy Option ROMs option needs to be turned off.
CAUTION: You cannot disable the SecureBoot feature using the Dell Command |
PowerShell Provider.
Possible values:
• Enabled
• Disabled
NOTE: One of the methods to disable SecureBoot feature is from the BIOS setup
screen.
SecureBootMode Allows the modification of secure boot operational mode.
Possible values:
• Deployed mode is the normal mode of operation for measuring the UEFI executable images.
Audit Mode enables the evaluation of changes to the Secure Boot key database.
NOTE: In Secure Boot Mode, Audit Mode can be changed to Deployed Mode, but
changing from Deployed Mode to Audit Mode is not supported.
Security
Table 19. Security
Attribute Name Description
Absolute Sets the value to the Absolute interface, and control the Absolute service.
30 Attributes supported in Dell Command | PowerShell Provider 2.3