Reference Guide
Attribute Name Description
FanSpeedLvl
Configures the fan speed control if the fan speed is set to Auto using FanSpeed attribute. 0 sets
the fan speed to the optimal speed level, and a higher percentage provides enhanced cooling.
Possible values: Integers ranging from 0 to 100
IntelReadyModeEn
This option enables or disables Intel Ready Mode Technology (iRMT).
Possible values:
• Enabled
• Disabled
IntlSmartConnect
Intel Smart Connect Technology (ISCT) identifies the nearby wireless connections while system is
in a sleeping state. SmartConnect Synchronizes email or social media applications that were open
when the system entered the sleep state.
Possible values:
• Enabled
• Disabled
LidSwitch
Enables or disables the lid switch functions.
Possible values:
• Enabled — OS setting determines the display behavior when lid is closed.
• Disabled — Display will not be affected when lid is closed.
ModBattChargeCfg
Configures the module bay battery charge mode.
Possible values:
• Standard — Charges the battery at a standard rate.
• Express — Charges the battery faster using the express charging algorithm, Dell's fast
charging technology
PeakShiftBatteryThreshold
Sets the value of the Peak Shift battery threshold. The acceptable value range is from 15 to 100
percent. When the Peak Shift battery threshold level is reached, the system starts using AC
power.
Possible values: Integers ranging from 15 to 100
PeakShiftCfg
Enables or disables Peak Shift configuration. Using Peak Shift, you can minimize the consumption
of AC power during the peak power usage period of the day.
Possible values:
• Enabled
• Disabled
PeakShiftDayConfiguration
Configures the days settings based on StartTime, EndTime, and ChargeStartTime. Using Peak
Shift configuration, you can minimize the consumption of AC power during the peak power usage
period of the day. You can set a start and end times for the Peak Shift period. During this period,
the system runs on battery if the battery charge is preceding the set battery threshold value. After
the Peak Shift period, the system runs on AC power without charging the battery. The system
functions normally using AC power and recharging the battery after the specified
ChargeStartTime.
Possible values:
• Enabled
• Disabled
PowerOnLidOpen
Set the PowerOnLidOpen feature.
Possible values:
24 Attributes supported in Dell Command | PowerShell Provider 2.3