Reference Guide

Attribute Name Description
• Enabled
• Disabled
CustomChargeStart
Sets the percentage value ranging from 50 to 95 at which custom battery charging should start.
NOTE: Primary Battery Custom Charge Start percent must be less than the Primary
Battery Custom Charge End percent and the minimum difference between the two
must be 5 percent.
Possible values: Integers ranging from 50 to 95
CustomChargeStop
Sets the percentage value ranging from 55 to 100 at which the custom battery charging should
stop.
NOTE: Primary Battery Custom Charge Start percentage must be less than the
Primary Battery Custom Charge End percent and the minimum difference between
the two must be 5 percent.
Possible values: Integers ranging from 55 to 100
DeepSleepCtrl
Controls when Deep Sleep is enabled.
Possible values:
• Disabled
• S5Only
• S4AndS5
DockBatteryChargeConfiguratio
n
Configures the dock battery charge mode.
Possible values:
• Standard — Charges the battery over a long period of time.
• Express — Charges the battery in Express Charge mode using Dell's fast charging technology.
FanCtrlOvrd
Runs the system fan at full speed.
Possible values:
• Enabled
• Disabled
FanSpeed
Sets the speed of the fan to Auto, High, Medium, Low, Medium High, or Medium Low. When set
to Auto, the system run time automatically sets the speed.
Possible values:
• Auto
• High
• Med
• Low
• MedHigh
• MedLow
FanSpeed
Sets the speed of the fan to Auto, High, Medium, Low, Medium High, or Medium Low. When set
to Auto, the system run time automatically sets the speed.
Possible values:
• Auto
• High
• Med
• Low
• MedHigh
• MedLow
Attributes supported in Dell Command | PowerShell Provider 2.3 23