Reference Guide
Attribute Name Description
• Enabled
• Disabled
AutoOnTue
Enables or disables the AutoOn functionality at the specified time on Tuesdays.
Possible values:
• Enabled
• Disabled
AutoOnWed
Enables or disables the AutoOn functionality at the specified time on Wednesdays
Possible values:
• Enabled
• Disabled
AutoOnThur
Enables or disables the AutoOn functionality at the specified time on Thursdays.
Possible values:
• Enabled
• Disabled
AutoOnFri
Enables or disables the AutoOn functionality at the specified time on Fridays.
Possible values:
• Enabled
• Disabled
AutoOnSat
Enables or disables the AutoOn functionality at the specified time on Saturdays.
Possible values:
• Enabled
• Disabled
AutoWakePeriod
Defines the time in minutes after which the system should automatically wake up from Standby,
Hibernate, or Switched off mode.
Possible values: integers ranging from 0 to 254
NOTE: The system wakes up from Sleep, Hibernate, or Switched off mode only if the
AutoOn option is enabled for everyday of the week.
BlinkPowerSupply1LED
Normally, the status LEDs on the back of the Power Supply Unit (PSU) displays solid green color.
Possible values:
• Enabled — The first power supply (PSU 1) status LED blinks for few seconds.
NOTE: There is no need for disabling the LEDs manually. When the Embedded
Controller (EC) gives the control back to PSU, the LED turns off automatically.
BlinkPowerSupply2LED
Normally, the status LEDs on the back of the Power Supply Unit (PSU) displays solid green color.
Possible values:
• Enabled — The second power supply (PSU 2) status LED blinks for few seconds.
NOTE: There is no need for disabling the LEDs manually. When the Embedded
Controller (EC) gives the control back to PSU, the LED turns off automatically.
BlockSleep
Blocks the system entering sleep (S3 state) mode in an OS environment. If enabled, the system
does not go into sleep mode, Intel Rapid Start is disabled automatically, and OS Power option is
blank if it was set to Sleep earlier.
Possible values:
22 Attributes supported in Dell Command | PowerShell Provider 2.3