Reference Guide

PowerManagement
Table 15. PowerManagement
Attribute Name Description
AcPwrRcvry
Controls the system's behavior when AC power is restored after AC power has been lost.
Possible values:
• Off — System stays off after AC power is restored.
• On — System powers on after AC power is restored.
• Last — System returns to the previous state after AC power recovery.
AdvancedBatteryChargeConfigu
ration
Configures the days settings based on BeginningOfDay and workperiod. Advanced Battery charge
mode uses standard charging algorithm and other methods during working hours to maximize
battery health. During working hours, express charge is used to charge the batteries faster. You
can configure the days and the work period during which the battery has to be charged. To enable
advanced battery charging, provide the day, and set the following:
Possible values:
• BeginningOfDay — To configure the AdvanceBatteryCharge start time in 24 hours format.
The value of hour must be in the range 0–23 and minute must be 0, 15, 30, or 45.
• Workperiod — To configure the duration of charging.
AdvBatteryChargeCfg
Enables or disables the Advanced Battery Charge configuration. During working hours, with the
Advanced Battery Charge configuration, the batteries can be charged faster using ExpressCharge.
Possible values:
• Enabled
• Disabled
AutoOn
Configures the days when the system has to turn on automatically at the time specified in
AutoOnHr and AutoOnMn. This function can turn on the system either every day, on weekdays, or
on selected days. If AutoOnHr is set to 23, and AutoOnTime is set to 53, then setting AutoOntime
to Weekdays turns on the system automatically on weekdays (Monday to Friday) at 11:53 p.m.. To
turn on the system on particular days, set AutoOnTime as Select Days, and then enable or disable
individual days by setting AutoOnSun -enabled, AutoOnMon -disabled, etc.
Possible values:
• Disabled
• EveryDay
• SelectDays
• Weekdays
AutoOnHr
Configures the hour when the system has to turn on automatically. Provide the value ranging from
0 to 23. To set the time 11:59 p.m., provide the value as 23.
Possible values: Integers ranging from 0 to 23
AutoOnMn
Configures the minute when the system has to turn on automatically. Provide the value ranging
from 0 to 59. To set the time 11:59 p.m., provide the value as 59.
Possible values: Integers ranging from 0 to 59
AutoOnSun
Enables or disables the AutoOn functionality at the specified time on Sundays.
Possible values:
• Enabled
• Disabled
AutoOnMon
Enables or disables the AutoOn functionality at the specified time on Mondays.
Possible values:
Attributes supported in Dell Command | PowerShell Provider 2.3 21