Reference Guide

Attribute Name Description
IrstTimer
Sets the Intel Rapid Start Timer. The value can be specified in minutes ranging from 0 to 999.
Specify the Rapid Start timer value as 0 to put the system into a low-power state immediately
after the system transition to a sleep mode.
Possible values: Integer ranging from 0 to 999
LimitCpuidValue
Restricts the maximum CPUID functions supported by the processor. Some operating system
does not complete the installation when more than three CPUID functions are supported.
Possible values:
• Enabled
• Disabled
LogicProc
Enables or disables HyperThreading in the processor.
Possible values:
• Enabled
• Disabled
MultiCoreSupport
Specifies whether the processor has one or more cores enabled. The performances of some
applications improve with additional cores.
Possible values:
• CoresAll — All cores are enabled.
• Cores1 — Only one core is enabled.
• Cores2 — Two cores are enabled.
• Cores4— Four cores are enabled.
• Cores6— Six cores are enabled.
• Cores8— Eight cores are enabled.
• Cores10 — Ten cores are enabled.
• Cores12 — Twelve cores are enabled.
• Cores14 — Fourteen cores are enabled.
• Cores16 — Sixteen cores are enabled.
NodeInterleave
Enables or disables memory interleave mode.
Possible values:
• Enabled
• Disabled
Speedstep
Intel SpeedStep technology that allows the processor to operate at two or more operating
speeds called P-states in ACPI terminology. When disabled, the processor operates at its
maximum frequency.
Possible values:
• Disabled
• Enabled
• MaximumPerformance
• MaximumBattery
IsochronousMode
Enables or disables System Isochronous mode.
NOTE: Isochronous mode may be best for audio and video streaming applications.
Possible values:
• Enabled - Enable this mode to reduce the latency of memory transactions at the expense of
bandwidth.
• Disabled - Disable this mode for applications that need high memory bandwidth.
TurboMode
Enables or disables the Intel TurboBoost mode of the processor.
16 Attributes supported in Dell Command | PowerShell Provider 2.3