Reference Guide

Passwords
Table 12. Passwords
Attribute Name Description
NOTE: If the criteria PwdMinLen >=8, PwdLowerCaseRqd=Enabled, and PwdUpperCaseRqd=Enabled is followed, then
StrongPassword is Enabled. If this criteria is not followed, then StrongPassword is Disabled. Vice-versa is also
applicable.
PwdMinLen
This feature controls the minimum number of characters that are mandatory for a password.
Possible values: 4 - 32
PwdLowerCaseRqd
This feature reinforces that the password must contain one lower case letter.
Possible values:
• Enabled
• Disabled
PwdUpperCaseRqd
This feature reinforces that the password must contain one upper case letter.
Possible values:
• Enabled
• Disabled
PwdDigitRqd
This feature reinforces that the password must contain one digit number.
Possible values:
• Enabled
• Disabled
PwdSpecialCharRqd
This feature reinforces password must contain one special character.
Possible values:
• Enabled
• Disabled
Performance
Table 13. Performance
Attribute Name Description
AdaptiveCStates
Adaptive C-States allow the system to dynamically detect high usage of a discrete graphics and
adjust system parameters for higher performance during that time period.
This feature requires an AC adapter due to higher energy consumption and dynamically it is not
possible to activate higher performance without an appropriate AC adapter. Other settings that
conserve power may block the utilization of this feature.
Possible values:
• Enabled
• Disabled
AdjCachePrefetch
Enables or disables the AdjacentCacheLinePrefetch feature.
Possible values:
• Enabled - CPU fetches the adjacent cache line in the other half of the sector.
• Disabled - CPU only fetches the cache line that contains the data currently required by the
CPU.
Attributes supported in Dell Command | PowerShell Provider 2.3 13