Reference Guide

Attribute Name Description
Possible values:
• IntelLocked - Locks SGX to support Intel Enclave Launch Provider.
• RuntimeSelectable - Allows operating system or hypervisor control of Enclave
Launch Provider.
SoftGuardEn
Congures Software Guard Extensions (SGX) feature. You can select Enabled or
SoftControlled if this option is disabled.
Possible values:
• Enabled
• Disabled
• SoftControlled
CAUTION: Using the Dell Command | PowerShell Provider, you cannot do the
following:
• Disable this feature if the current state is Enabled or SoftControlled
• Enable this feature if the current state is SoftControlled
• Change this feature to SoftControlled if the current state is Enabled
NOTE: One of the methods of conguring Software Guard Extensions (SGX)
feature is from the BIOS setup screen.
Manageability
Table 8. Manageability
Attribute Description
AmtCap
Set the intel active management technology (AMT) capability.
Possible Values:
• Enabled - If Intel Active Management Technology is enabled, MEBx is available through
the F12 menu and you can provision AMT. MEBx may not be not accessible if OROM
Keyboard Access is disabled.
• Disabled - If Intel Active Management Technology is disabled, MEBx is not available in
pre-boot. Once disabled, Intel Active Management Technology can only be enabled
through the BIOS interface. If the Intel AMT is already provisioned, AMT cannot be
disabled. Un-provisioning AMT is required to disable AMT.
• Restrict MEBx Access - If Intel Active Management Technology is enabled, MEBx is
not available in pre-boot, but you can provision AMT from the operating systems.
PostMebxKey
MEBx stands for Intel Management Engine BIOS Extension. Enables or disables the MEBx
hotkey function when the system boots.
• Enabled
• Disabled
UsbProvision
Enables or disables provisioning of Intel AMT from a USB storage device.
Possible values:
• Enabled — Intel AMT can be provisioned using the local provisioning le via a USB
storage device.
• Disabled — Provisioning of Intel AMT from a USB storage device is blocked.
Attributes supported in Dell Command | PowerShell Provider 2.2 9